Contract joinery in Thatcham
Purpose-made joinery for main contractors, architects, shopfitters and developers, manufactured to drawing and delivered UK-wide. Covering Thatcham and the wider Berkshire area.
| Item | Basis |
|---|---|
| Basis of price | Your drawings, schedule or bill of quantities |
| Setting out | Site survey before manufacture, recorded per opening |
| Timber | FSC certified, chain-of-custody supplied with the order |
| Finish | Workshop applied, any RAL or heritage colour |
| Delivery | UK-wide, to an agreed programme date |
Quote for Thatcham
Free measured survey in Thatcham.
Contract joinery in Thatcham
Ask three firms about Site Measured Surveys in Thatcham and you will get three different answers. Local property is overwhelmingly Thames-side villas, Victorian terraces and dense 1980s commercial fit-out stock, which is why we never quote from a catalogue. With river humidity and localised flood exposure in the mix, swelling and binding on ground-floor doors after flood or high water table events is a question of when rather than whether. The part that matters is recording the building as built rather than as drawn.
The site visit comes first, because assumptions made in an office get paid for on site. Ask us for a figure and you will get one, with the lead time stated alongside it.
A local consideration we always raise: flood-zone properties benefit from raised thresholds and marine-grade fixings.
What we cover locally
- Architectural Joinery in Thatcham
- Contract Joinery Packages in Thatcham
- Shopfitting Joinery in Thatcham
- Commercial Door Sets in Thatcham
Survey visits in Thatcham are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Thatcham
Every item below is manufactured to your dimensions.
| Item | Scope | What we control |
|---|---|---|
| Architectural Joinery REF TJ-01 | Purpose-made items worked to architect's drawings and schedules. | One-off items worked from a drawing set rather than a catalogue |
| Contract Joinery Packages REF TJ-02 | Priced against a bill of quantities and delivered to programme. | Packages priced against a bill and delivered to the date on the programme |
| Shopfitting Joinery REF TJ-03 | Counters, display units and back-of-house fit-out. | Retail and hospitality fit-out worked to a tight overnight programme |
| Commercial Door Sets REF TJ-04 | Fire-rated and acoustic door sets supplied complete. | Certified door sets supplied complete with frame and ironmongery prep |
| Reception and Bar Joinery REF TJ-05 | Front-of-house counters, reception desks and servery units. | Front-of-house pieces where the finish is under constant close inspection |
| Wall Panelling Systems REF TJ-06 | Demountable and fixed panelling for commercial interiors. | Panelling set out so joint lines land where the eye expects them |
| Purpose-Made Joinery REF TJ-07 | Anything that cannot be bought off the shelf. | The awkward items no stockist carries, made to your exact sizes |
| Site Measured Surveys REF TJ-08 | Full dimensional survey before anything goes into manufacture. | Recording the building as built rather than as drawn |
How a contract runs in Thatcham
The same sequence on every job, whether it is one item or four hundred.
| Stage | What happens |
|---|---|
| Drawings received | We query anything ambiguous before pricing, not after |
| Quotation | Priced by item, lead time stated, held for the order |
| Survey | Every opening recorded as built, at several points |
| Manufacture | Workshop made and finished under controlled conditions |
| Delivery | Protected, palletised, to the programme date agreed |
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“Drawings were queried before manufacture rather than after, which saved us a week on site.”
Verified client, Berkshire“Sizes were right first time across the whole schedule and delivery hit the date we agreed.”
Verified client, Berkshire“Priced against our bill without the usual list of exclusions buried in the small print.”
Verified client, BerkshireThatcham questions
Will the finish need maintaining?
A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.
What if the opening is out of square?
Most older openings are. The survey records the actual dimensions at several points and the unit is manufactured to suit, which is the main reason we survey rather than work from the sizes given over the phone.
Can you match an existing profile?
Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.
What guarantee do you provide?
Ten years on workmanship, covering manufacture and the factory-applied finish. Where we install, the installation is covered too. It is issued in writing with the handover paperwork.
How do you handle glazing?
Standard double glazed units for most work, and slim-cavity units where a conservation officer has restricted sightlines. Single glazing with putty lines is available where the consent requires it.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248