Contract joinery in Bodmin
Purpose-made joinery for main contractors, architects, shopfitters and developers, manufactured to drawing and delivered UK-wide. Covering Bodmin and the wider Cornwall area.
| Item | Basis |
|---|---|
| Basis of price | Your drawings, schedule or bill of quantities |
| Setting out | Site survey before manufacture, recorded per opening |
| Timber | FSC certified, chain-of-custody supplied with the order |
| Finish | Workshop applied, any RAL or heritage colour |
| Delivery | UK-wide, to an agreed programme date |
Quote for Bodmin
Free measured survey in Bodmin.
Contract joinery in Bodmin
Site Measured Surveys is one of those jobs in Bodmin where the survey decides everything. The housing here is largely granite fishermen's cottages, slate-hung terraces and modern coastal builds, and that shapes what will actually fit. Then there is the most severe salt and wind exposure in England, which reliably produces accelerated coating failure and salt crystallisation damage at glazing lines given enough seasons. What we concentrate on is recording the building as built rather than as drawn.
Manufacture only starts once the survey figures are agreed with you in writing. A quick call or a photograph of the opening is usually enough to get you a price.
One thing that catches people out here: Cornish exposure grades mean specification should assume worst-case wind-driven rain.
What we cover locally
- Architectural Joinery in Bodmin
- Contract Joinery Packages in Bodmin
- Shopfitting Joinery in Bodmin
- Commercial Door Sets in Bodmin
Survey visits in Bodmin are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Bodmin
Every item below is manufactured to your dimensions.
| Item | Scope | What we control |
|---|---|---|
| Architectural Joinery REF TJ-01 | Purpose-made items worked to architect's drawings and schedules. | One-off items worked from a drawing set rather than a catalogue |
| Contract Joinery Packages REF TJ-02 | Priced against a bill of quantities and delivered to programme. | Packages priced against a bill and delivered to the date on the programme |
| Shopfitting Joinery REF TJ-03 | Counters, display units and back-of-house fit-out. | Retail and hospitality fit-out worked to a tight overnight programme |
| Commercial Door Sets REF TJ-04 | Fire-rated and acoustic door sets supplied complete. | Certified door sets supplied complete with frame and ironmongery prep |
| Reception and Bar Joinery REF TJ-05 | Front-of-house counters, reception desks and servery units. | Front-of-house pieces where the finish is under constant close inspection |
| Wall Panelling Systems REF TJ-06 | Demountable and fixed panelling for commercial interiors. | Panelling set out so joint lines land where the eye expects them |
| Purpose-Made Joinery REF TJ-07 | Anything that cannot be bought off the shelf. | The awkward items no stockist carries, made to your exact sizes |
| Site Measured Surveys REF TJ-08 | Full dimensional survey before anything goes into manufacture. | Recording the building as built rather than as drawn |
How a contract runs in Bodmin
The same sequence on every job, whether it is one item or four hundred.
| Stage | What happens |
|---|---|
| Drawings received | We query anything ambiguous before pricing, not after |
| Quotation | Priced by item, lead time stated, held for the order |
| Survey | Every opening recorded as built, at several points |
| Manufacture | Workshop made and finished under controlled conditions |
| Delivery | Protected, palletised, to the programme date agreed |
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“Drawings were queried before manufacture rather than after, which saved us a week on site.”
Verified client, Cornwall“Sizes were right first time across the whole schedule and delivery hit the date we agreed.”
Verified client, Cornwall“Priced against our bill without the usual list of exclusions buried in the small print.”
Verified client, CornwallBodmin questions
Will the finish need maintaining?
A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.
Do you fit, or supply only?
Both. Supply-only is common for trade and contractor clients. For private clients we usually recommend supply and fit, because responsibility for the fit and the finish then sits in one place.
What if the opening is out of square?
Most older openings are. The survey records the actual dimensions at several points and the unit is manufactured to suit, which is the main reason we survey rather than work from the sizes given over the phone.
Can you work on a listed building?
Yes, and a significant share of our work is listed or conservation area. We can supply drawings and section details to support a listed building consent or planning application, though the consent itself remains the owner's responsibility.
Can you match an existing profile?
Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248