Contract joinery in Fleet
Purpose-made joinery for main contractors, architects, shopfitters and developers, manufactured to drawing and delivered UK-wide. Covering Fleet and the wider Hampshire area.
| Item | Basis |
|---|---|
| Basis of price | Your drawings, schedule or bill of quantities |
| Setting out | Site survey before manufacture, recorded per opening |
| Timber | FSC certified, chain-of-custody supplied with the order |
| Finish | Workshop applied, any RAL or heritage colour |
| Delivery | UK-wide, to an agreed programme date |
Quote for Fleet
Free measured survey in Fleet.
Contract joinery in Fleet
Commercial Door Sets across Fleet tends to be driven by the condition of what is already there. Because the area is mainly naval-era terraces, New Forest timber-framed cottages and 1960s coastal estates, no two openings measure quite the same. The other factor is high wind-driven rain off the Solent, which is why water ingress at head and jamb on exposed south-west elevations is the most common reason people call us. The value is in certified door sets supplied complete with frame and ironmongery prep, not in the timber bill.
Nothing goes into manufacture until a surveyor has checked each opening on site. Send what you have, even if it is only a phone photo, and we will take it from there.
Worth knowing locally: conservation stock in Winchester and Lymington usually requires slim-profile glazing.
What we cover locally
- Architectural Joinery in Fleet
- Contract Joinery Packages in Fleet
- Shopfitting Joinery in Fleet
- Commercial Door Sets in Fleet
Survey visits in Fleet are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Fleet
Every item below is manufactured to your dimensions.
| Item | Scope | What we control |
|---|---|---|
| Architectural Joinery REF TJ-01 | Purpose-made items worked to architect's drawings and schedules. | One-off items worked from a drawing set rather than a catalogue |
| Contract Joinery Packages REF TJ-02 | Priced against a bill of quantities and delivered to programme. | Packages priced against a bill and delivered to the date on the programme |
| Shopfitting Joinery REF TJ-03 | Counters, display units and back-of-house fit-out. | Retail and hospitality fit-out worked to a tight overnight programme |
| Commercial Door Sets REF TJ-04 | Fire-rated and acoustic door sets supplied complete. | Certified door sets supplied complete with frame and ironmongery prep |
| Reception and Bar Joinery REF TJ-05 | Front-of-house counters, reception desks and servery units. | Front-of-house pieces where the finish is under constant close inspection |
| Wall Panelling Systems REF TJ-06 | Demountable and fixed panelling for commercial interiors. | Panelling set out so joint lines land where the eye expects them |
| Purpose-Made Joinery REF TJ-07 | Anything that cannot be bought off the shelf. | The awkward items no stockist carries, made to your exact sizes |
| Site Measured Surveys REF TJ-08 | Full dimensional survey before anything goes into manufacture. | Recording the building as built rather than as drawn |
How a contract runs in Fleet
The same sequence on every job, whether it is one item or four hundred.
| Stage | What happens |
|---|---|
| Drawings received | We query anything ambiguous before pricing, not after |
| Quotation | Priced by item, lead time stated, held for the order |
| Survey | Every opening recorded as built, at several points |
| Manufacture | Workshop made and finished under controlled conditions |
| Delivery | Protected, palletised, to the programme date agreed |
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“Drawings were queried before manufacture rather than after, which saved us a week on site.”
Verified client, Hampshire“Sizes were right first time across the whole schedule and delivery hit the date we agreed.”
Verified client, Hampshire“Priced against our bill without the usual list of exclusions buried in the small print.”
Verified client, HampshireFleet questions
Do you fit, or supply only?
Both. Supply-only is common for trade and contractor clients. For private clients we usually recommend supply and fit, because responsibility for the fit and the finish then sits in one place.
Will the finish need maintaining?
A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.
Do you work in hardwood or softwood?
Both. Engineered hardwood is the default where movement or exposure is a concern, and slow-grown softwood is often the better value choice for painted work in sheltered positions. We will tell you which we would specify and why.
Do you take a deposit?
Not before the measured survey. A deposit is only requested once the survey is complete and you have approved the final schedule and price.
Can you price from drawings?
Yes. Send a drawing set or a schedule and we will price against it. If anything is ambiguous we will query it before quoting rather than assume and reprice later.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248