Contract joinery in Alnwick
Purpose-made joinery for main contractors, architects, shopfitters and developers, manufactured to drawing and delivered UK-wide. Covering Alnwick and the wider Northumberland area.
| Item | Basis |
|---|---|
| Basis of price | Your drawings, schedule or bill of quantities |
| Setting out | Site survey before manufacture, recorded per opening |
| Timber | FSC certified, chain-of-custody supplied with the order |
| Finish | Workshop applied, any RAL or heritage colour |
| Delivery | UK-wide, to an agreed programme date |
Quote for Alnwick
Free measured survey in Alnwick.
Contract joinery in Alnwick
Purpose-Made Joinery across Alnwick tends to be driven by the condition of what is already there. Property here runs to border stone farmhouses, colliery terraces and coastal fishing cottages, and each of those brings its own set of dimensions. the harshest combination of cold, wind and salt in England is the local complication, and combined frost and salt damage stripping finishes within a few seasons is what it eventually causes. Where we put the effort is the awkward items no stockist carries, made to your exact sizes.
Nothing is ordered until someone has stood in front of the opening with a tape. We will price it properly in writing, and we will tell you if it is not worth doing.
Bear in mind for this area: Northumberland exposure justifies the heaviest sections and stainless fixings.
What we cover locally
- Architectural Joinery in Alnwick
- Contract Joinery Packages in Alnwick
- Shopfitting Joinery in Alnwick
- Commercial Door Sets in Alnwick
Survey visits in Alnwick are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Alnwick
Every item below is manufactured to your dimensions.
| Item | Scope | What we control |
|---|---|---|
| Architectural Joinery REF TJ-01 | Purpose-made items worked to architect's drawings and schedules. | One-off items worked from a drawing set rather than a catalogue |
| Contract Joinery Packages REF TJ-02 | Priced against a bill of quantities and delivered to programme. | Packages priced against a bill and delivered to the date on the programme |
| Shopfitting Joinery REF TJ-03 | Counters, display units and back-of-house fit-out. | Retail and hospitality fit-out worked to a tight overnight programme |
| Commercial Door Sets REF TJ-04 | Fire-rated and acoustic door sets supplied complete. | Certified door sets supplied complete with frame and ironmongery prep |
| Reception and Bar Joinery REF TJ-05 | Front-of-house counters, reception desks and servery units. | Front-of-house pieces where the finish is under constant close inspection |
| Wall Panelling Systems REF TJ-06 | Demountable and fixed panelling for commercial interiors. | Panelling set out so joint lines land where the eye expects them |
| Purpose-Made Joinery REF TJ-07 | Anything that cannot be bought off the shelf. | The awkward items no stockist carries, made to your exact sizes |
| Site Measured Surveys REF TJ-08 | Full dimensional survey before anything goes into manufacture. | Recording the building as built rather than as drawn |
How a contract runs in Alnwick
The same sequence on every job, whether it is one item or four hundred.
| Stage | What happens |
|---|---|
| Drawings received | We query anything ambiguous before pricing, not after |
| Quotation | Priced by item, lead time stated, held for the order |
| Survey | Every opening recorded as built, at several points |
| Manufacture | Workshop made and finished under controlled conditions |
| Delivery | Protected, palletised, to the programme date agreed |
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“Drawings were queried before manufacture rather than after, which saved us a week on site.”
Verified client, Northumberland“Sizes were right first time across the whole schedule and delivery hit the date we agreed.”
Verified client, Northumberland“Priced against our bill without the usual list of exclusions buried in the small print.”
Verified client, NorthumberlandAlnwick questions
Do you take a deposit?
Not before the measured survey. A deposit is only requested once the survey is complete and you have approved the final schedule and price.
Will the finish need maintaining?
A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.
What if the opening is out of square?
Most older openings are. The survey records the actual dimensions at several points and the unit is manufactured to suit, which is the main reason we survey rather than work from the sizes given over the phone.
Can you match an existing profile?
Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.
What guarantee do you provide?
Ten years on workmanship, covering manufacture and the factory-applied finish. Where we install, the installation is covered too. It is issued in writing with the handover paperwork.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248