Contract joinery in Shepton Mallet
Purpose-made joinery for main contractors, architects, shopfitters and developers, manufactured to drawing and delivered UK-wide. Covering Shepton Mallet and the wider Somerset area.
| Item | Basis |
|---|---|
| Basis of price | Your drawings, schedule or bill of quantities |
| Setting out | Site survey before manufacture, recorded per opening |
| Timber | FSC certified, chain-of-custody supplied with the order |
| Finish | Workshop applied, any RAL or heritage colour |
| Delivery | UK-wide, to an agreed programme date |
Quote for Shepton Mallet
Free measured survey in Shepton Mallet.
Contract joinery in Shepton Mallet
Half the Wall Panelling Systems problems we fix in Shepton Mallet started as a sizing assumption. With Bath stone Georgian terraces, Levels farmhouses and Victorian seaside stock making up much of the area, off-the-shelf sizes rarely line up. Then there is very high rainfall with standing water across the Levels, which reliably produces prolonged saturation causing frame distortion and sash binding given enough seasons. The part that matters is panelling set out so joint lines land where the eye expects them.
Manufacture only starts once the survey figures are agreed with you in writing. One call is usually enough for us to tell you roughly where the price will land.
A local consideration we always raise: Bath's World Heritage status makes joinery detail subject to close scrutiny.
What we cover locally
- Architectural Joinery in Shepton Mallet
- Contract Joinery Packages in Shepton Mallet
- Shopfitting Joinery in Shepton Mallet
- Commercial Door Sets in Shepton Mallet
Survey visits in Shepton Mallet are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Shepton Mallet
Every item below is manufactured to your dimensions.
| Item | Scope | What we control |
|---|---|---|
| Architectural Joinery REF TJ-01 | Purpose-made items worked to architect's drawings and schedules. | One-off items worked from a drawing set rather than a catalogue |
| Contract Joinery Packages REF TJ-02 | Priced against a bill of quantities and delivered to programme. | Packages priced against a bill and delivered to the date on the programme |
| Shopfitting Joinery REF TJ-03 | Counters, display units and back-of-house fit-out. | Retail and hospitality fit-out worked to a tight overnight programme |
| Commercial Door Sets REF TJ-04 | Fire-rated and acoustic door sets supplied complete. | Certified door sets supplied complete with frame and ironmongery prep |
| Reception and Bar Joinery REF TJ-05 | Front-of-house counters, reception desks and servery units. | Front-of-house pieces where the finish is under constant close inspection |
| Wall Panelling Systems REF TJ-06 | Demountable and fixed panelling for commercial interiors. | Panelling set out so joint lines land where the eye expects them |
| Purpose-Made Joinery REF TJ-07 | Anything that cannot be bought off the shelf. | The awkward items no stockist carries, made to your exact sizes |
| Site Measured Surveys REF TJ-08 | Full dimensional survey before anything goes into manufacture. | Recording the building as built rather than as drawn |
How a contract runs in Shepton Mallet
The same sequence on every job, whether it is one item or four hundred.
| Stage | What happens |
|---|---|
| Drawings received | We query anything ambiguous before pricing, not after |
| Quotation | Priced by item, lead time stated, held for the order |
| Survey | Every opening recorded as built, at several points |
| Manufacture | Workshop made and finished under controlled conditions |
| Delivery | Protected, palletised, to the programme date agreed |
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“Drawings were queried before manufacture rather than after, which saved us a week on site.”
Verified client, Somerset“Sizes were right first time across the whole schedule and delivery hit the date we agreed.”
Verified client, Somerset“Priced against our bill without the usual list of exclusions buried in the small print.”
Verified client, SomersetShepton Mallet questions
Do you work in hardwood or softwood?
Both. Engineered hardwood is the default where movement or exposure is a concern, and slow-grown softwood is often the better value choice for painted work in sheltered positions. We will tell you which we would specify and why.
Can you price from drawings?
Yes. Send a drawing set or a schedule and we will price against it. If anything is ambiguous we will query it before quoting rather than assume and reprice later.
How do you handle glazing?
Standard double glazed units for most work, and slim-cavity units where a conservation officer has restricted sightlines. Single glazing with putty lines is available where the consent requires it.
What guarantee do you provide?
Ten years on workmanship, covering manufacture and the factory-applied finish. Where we install, the installation is covered too. It is issued in writing with the handover paperwork.
Can you match an existing profile?
Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248