Contract joinery in Tilehurst
Purpose-made joinery for main contractors, architects, shopfitters and developers, manufactured to drawing and delivered UK-wide. Covering Tilehurst and the wider Berkshire area.
| Item | Basis |
|---|---|
| Basis of price | Your drawings, schedule or bill of quantities |
| Setting out | Site survey before manufacture, recorded per opening |
| Timber | FSC certified, chain-of-custody supplied with the order |
| Finish | Workshop applied, any RAL or heritage colour |
| Delivery | UK-wide, to an agreed programme date |
Quote for Tilehurst
Free measured survey in Tilehurst.
Contract joinery in Tilehurst
If Site Measured Surveys in Tilehurst were straightforward, there would be a stock size for it. You will find mostly Thames-side villas, Victorian terraces and dense 1980s commercial fit-out stock in this area, and it moves as it ages. With river humidity and localised flood exposure in the mix, swelling and binding on ground-floor doors after flood or high water table events is a question of when rather than whether. Our focus on this is recording the building as built rather than as drawn.
We check on site before committing anything to the saw, and we query what does not add up. Rough dimensions and a couple of photographs are enough for us to price it properly.
A detail specific to this area: flood-zone properties benefit from raised thresholds and marine-grade fixings.
What we cover locally
- Architectural Joinery in Tilehurst
- Contract Joinery Packages in Tilehurst
- Shopfitting Joinery in Tilehurst
- Commercial Door Sets in Tilehurst
Survey visits in Tilehurst are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Tilehurst
Every item below is manufactured to your dimensions.
| Item | Scope | What we control |
|---|---|---|
| Architectural Joinery REF TJ-01 | Purpose-made items worked to architect's drawings and schedules. | One-off items worked from a drawing set rather than a catalogue |
| Contract Joinery Packages REF TJ-02 | Priced against a bill of quantities and delivered to programme. | Packages priced against a bill and delivered to the date on the programme |
| Shopfitting Joinery REF TJ-03 | Counters, display units and back-of-house fit-out. | Retail and hospitality fit-out worked to a tight overnight programme |
| Commercial Door Sets REF TJ-04 | Fire-rated and acoustic door sets supplied complete. | Certified door sets supplied complete with frame and ironmongery prep |
| Reception and Bar Joinery REF TJ-05 | Front-of-house counters, reception desks and servery units. | Front-of-house pieces where the finish is under constant close inspection |
| Wall Panelling Systems REF TJ-06 | Demountable and fixed panelling for commercial interiors. | Panelling set out so joint lines land where the eye expects them |
| Purpose-Made Joinery REF TJ-07 | Anything that cannot be bought off the shelf. | The awkward items no stockist carries, made to your exact sizes |
| Site Measured Surveys REF TJ-08 | Full dimensional survey before anything goes into manufacture. | Recording the building as built rather than as drawn |
How a contract runs in Tilehurst
The same sequence on every job, whether it is one item or four hundred.
| Stage | What happens |
|---|---|
| Drawings received | We query anything ambiguous before pricing, not after |
| Quotation | Priced by item, lead time stated, held for the order |
| Survey | Every opening recorded as built, at several points |
| Manufacture | Workshop made and finished under controlled conditions |
| Delivery | Protected, palletised, to the programme date agreed |
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“Drawings were queried before manufacture rather than after, which saved us a week on site.”
Verified client, Berkshire“Sizes were right first time across the whole schedule and delivery hit the date we agreed.”
Verified client, Berkshire“Priced against our bill without the usual list of exclusions buried in the small print.”
Verified client, BerkshireTilehurst questions
Can you match an existing profile?
Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.
How do you handle glazing?
Standard double glazed units for most work, and slim-cavity units where a conservation officer has restricted sightlines. Single glazing with putty lines is available where the consent requires it.
Do you work in hardwood or softwood?
Both. Engineered hardwood is the default where movement or exposure is a concern, and slow-grown softwood is often the better value choice for painted work in sheltered positions. We will tell you which we would specify and why.
Can you work on a listed building?
Yes, and a significant share of our work is listed or conservation area. We can supply drawings and section details to support a listed building consent or planning application, though the consent itself remains the owner's responsibility.
How long does a typical order take?
Most made-to-size orders run six to ten weeks from survey to delivery. Conservation and heavily detailed work can take longer, and we confirm the lead time in writing at quotation rather than leaving it open.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248